Welcome to come Guangzhou PuYi Environmental Technology Co., Ltd. Official website
China | English
Guangzhou PuYi Environmental Technology Co., Ltd.
Hotline
188-2415-1909

DF-15 Pulse Backflush Industrial Dust Collector

DF-15 Pulse Backflush Industrial Dust Collector
Product introduction

  DF Series Pulse Backflush Industrial Dust Collector     

 

>> Product Introduction  Product  I ntroduction

Pulse back blow industrial dust collector

DF-15 Pulse Backflush Industrial Dust Collector

>> Overview of DF-15 Pulse Backflush Industrial Dust Collector

DF series products are characterized by beautiful appearance, large air volume, and pulse back blowing dust removal. They adopt an integrated cabinet structure and beautiful appearance. They are specially designed for floating dust in the powder industry, chemical industry, metal processing industry, woodworking furniture industry, etc. Cost-effective. Equipped with Siemens motor and Japanese Toray polyester fiber filter cartridge to ensure high-level filtration accuracy and efficiency.

Pulse back blow industrial dust collector

- -------------------------------- -

>> Product FeaturesPulse back blow industrial dust collector

♦   Siemens motor, continuous escort

0ba2a68424.png

In terms of power system, the three-phase 380V voltage adopts Siemens three-phase asynchronous motors, equipped with special custom aluminum alloy impellers, the perfect combination of negative pressure and flow, stable operation, low failure rate, low noise, and can work continuously for 24 hours.

- -------------------------------- -

 ♦   Cartridge filter, high filtration accuracy

For the filtration system, a cartridge filter is used, and a Japanese Toray polyester fiber substrate is used. Standard configuration of polyester fiber oil-proof and water-proof material, the filtration accuracy of dust with an equivalent diameter of 3 microns or more can reach more than 99%, and a filter cartridge material with higher filtration accuracy can be selected.

 

Pulse back blow industrial dust collector

Specially set dust cleaning door, no secondary pollution 

The pneumatic pulse blowback system consists of a cylinder, an electromagnetic pulse valve, a PLC controller, and compressed air. One end of the pulse valve is connected to a compressed air storage cylinder and the other end is connected to an injection pipe. An exhaust valve is installed on the valve cover, and the exhaust valve is controlled by a pulse controller.
           When there is no signal from the pulse controller, the pulse solenoid valve starts to work, and each time the ash cleaning is completed at about 0.1 to 0.3S, it is the high-pressure air that is sprayed at this instant to play a good ash cleaning effect. Air enters the filter cartridge at a high flow rate, causing the filter cartridge to expand rapidly, causing an impact vibration, causing the dust attached to the filter cartridge to be shaken off, and the fine dust adsorbed on the surface of the filter material is shaken into the dust collecting bucket under the action of the airflow .

   

Pulse back blow industrial dust collector

♦   Electrical control system, quality assurance

In terms of electrical systems, the main electrical control components are from internationally renowned brands-French Schneider products. The motor realizes independent control of the electrical box, built-in power sequence switch, thermal overload protection, phase loss, reverse phase and other phase sequence protection. The control panel is simple and generous, which can easily realize remote control, linkage control and other functions.

Pulse back blow industrial dust collector

Pulse back blow industrial dust collector♦   Drawer type dust box, practical and convenient

The dust collecting box adopts a drawer structure. After the dust is full, open the door panel, and the dust collecting box can be pulled out to clean up the dust. After the dust collecting box is completed, the dust collecting box can be sent in. Convenient, fast and practical.

Pulse back blow industrial dust collector♦   Industrial non-slip casters, top polyurethane material

Industrial mobile casters are standard accessories for this machine. The wheels are made of top-grade polyurethane (PU), and the bracket is made of 2.5mm pickling plate to increase the reinforcement. Each 4 inch caster can carry 150kg. The tread design of the wheel surface enhances the anti-skid performance.

♦   Customized suction port, according to your needs

Pulse back blow industrial dust collector


>> Technical Parameters of DF-15 Pulse Backflush Industrial Dust Collector

The specifications and models of different manufacturers are not the same. It is common to see small and large products on the market. The following are the most reasonable and optimized size specifications designed by our company based on detailed and parameter calculations and engineers' years of field experience. The technical parameters of the DF-15 pulse backflush industrial dust collector can also be customized according to customer requirements.

Pulse back blow industrial dust collector

The above are the technical parameters of the conventional DF-15 pulse backflush industrial dust collector. For larger air volume or special size, please contact our engineers to customize it for you.

>> Application Case of DF-15 Pulse Backflush Industrial Dust Collector

 

 Pulse back blow industrial dust collector

>> Guangzhou Puyi Environmental Technology Co., Ltd.

Pulse back blow industrial dust collector

Address: A1, Courtyard No. 4, Yongfeng Road, Yongshan Village, Shiji Town, Panyu District, Guangzhou

Contact: Mr. Zou

Phone: 188-2415-1909

Postcode: 511450

Email: market@pureyie.com

Website: http://en.pureyie.com


 

 


PagekeyDF-15 Pulse Backflush Industrial Dust Collector

Guangzhou PuYi Environmental Technology Co., Ltd. © Copyright 2018     Technical support: Changli    Record number

Scavenging QRC